Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a Toyota Auris

Model: Toyota Auris E180 - Years 2012-2018
Part: Service warning light

Today we will see how to perform a service reset on a second generation Toyota Auris. So first of all, we need to turn on the ignition of the vehicle without starting the engine, then we press the "TRIP" button, located on the right side of the steering wheel, until we see the "TRIP A" screen on the information display of the speedometer, then we turn off the ignition. Now we press and hold the "TRIP" button and then turn on the vehicle's dashboard, after that we wait for the end of the flashing of the dashes and the appearance of the "000000" message to perform the reset and complete the job as shown in the video.

Posted on 27 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Toyota Auris
How to Reset the Service Light on Toyota Auris
Toyota Auris (2012-2018 / E180) To manually reset the service light on your Toyota Auris, follow the procedure described in this guide. First, get into the car and turn on the ignit…
How do you reset the service light in the Toyota Auris?
How do you reset the service light in the Toyota Auris?
Toyota Auris (2012-2018 / E180) The resetting of the service light in the Toyota Auris can be done not only in the workshop with the appropriate electronic equipment, but also thank…
How to Reset the Service Light on a Toyota Auris
How to Reset the Service Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) Resetting the service light on a Toyota Auris is a very simple task that can be done independently, aided by our short video tutorial. To perform the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos