Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump Assembly Installed on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel pump

See other generations:
Video tutorial

Here’s how to remove the fuel pump assembly installed on a Toyota Yaris. First, disconnect the battery cables, then remove the rear seats of the car. You will find the wiring and a plastic or metal piece with screws that need to be removed.

Using a socket spanner, undo the securing screws of the metal cover and remove it from its position. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, using a socket spanner, undo the securing bolts located on the sides.

Finally, disconnect the power connectors and the fluid circulation hoses.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's tutorial video, you will see the steps that will allow you to remove and replace the fuel pump or float of the Toyota Yaris. First, open t…
Removing Fuel Pump with Float from Toyota Yaris
Removing Fuel Pump with Float from Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this tutorial video, you will learn how to remove the fuel pump with float from a Toyota Yaris. The float is located under the rear seats of the c…
Replacing Fuel Pump on Toyota Yaris 1.0 VTi
Replacing Fuel Pump on Toyota Yaris 1.0 VTi
Toyota Yaris (1999-2005 / Xp10) In today's tutorial video, learn how to remove and replace the fuel pump on a first-generation Toyota Yaris by following these simple steps. First, o…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the fuel pump relay located in the Toyota Yaris? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos