Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Rear bumper

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the rear bumper of the Toyota Corolla. First, we open the rear hatch of the trunk and start unscrewing the fastening screws found on the top, removing the plastic partition; then we unscrew the additional screws found at the bottom and on both sides of the rear wheel arches, as shown in the video.

At this point, we gently detach the bumper on the sides until it is completely removed, replacing it if necessary with a new one; we then reassemble the rear bumper.


Posted on 10 September 2025 by ScegliAuto


Related tutorials

How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…
Removing and Replacing the Front Bumper on Toyota Corolla
Removing and Replacing the Front Bumper on Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of …
Removing Front Bumper on Toyota Corolla-Auris
Removing Front Bumper on Toyota Corolla-Auris
Toyota Corolla (2000-2007 / MK 2) In this video tutorial, you will see the instructions for removing the bumper on various Toyota models, particularly the Corolla and Auris. First, op…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos