|
Do it yourself
| |||
| ||||
How to program a remote control for a Toyota Celica 2000/2005
Model: Toyota Celica
T230
- Years 1999-2006
Let's see how to program a remote control for a Toyota Celica 2000/2005: open the driver's door and make sure all doors are unlocked, and have all the remotes you want to program within reach. Insert and remove the ignition key from the ignition switch, without starting the engine, twice. After the second removal of the key, close and open the driver's door twice. Insert the key into the ignition for the third time and leave it in. Close the driver's door. Turn on the ignition and then immediately turn it off, then remove it from the ignition. You will hear a cycle of locking/unlocking of the locks, confirming that the vehicle is in programming mode. At this point, press the lock and unlock buttons on the first remote for 2 seconds. Release the buttons, then briefly press the "lock" button. At this point, the locks should perform a new cycle of locking/unlocking. To exit programming mode, simply open the driver's door.
Posted on 26 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Celica
(1999-2006 /
T230)
To replace the injectors on a Toyota Celica, open the bonnet to access the top of the engine block. Locate the connectors attached to the injectors a…
Toyota Celica
(1999-2006 /
T230)
To replace the front headlamp on a Toyota Celica, open the bonnet to access the top of the headlamp. Here, you will find three screws securing the he…
Toyota Celica
(1999-2006 /
T230)
Today, let’s discover the main instructions for removing the front seat of the Toyota Celica. First, open the front door of the vehicle and begin uns…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.265
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |