Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the starter motor of the Toyota Land Cruiser

Model: Toyota Land Cruiser J120, MK 10 - Years 2002-2009
Part: Fuse box

In this video, the YouTuber provides us with a guide to diagnose a problem with the starter motor of the Toyota Land Cruiser (but obviously it also works for other cars). When he turned the key, he heard a "click" but the engine did not start. This "click" indicates that the battery has enough charge to power the relay; so the starter motor could be stuck or the starter relay could be faulty. We open the hood and locate the relay box: using the mirror diagram stamped on the cover of the box, we find the starter motor relay, indicated as "starter" or "starter relay" and remove it from its seat. We insert a metal paperclip into the two slots corresponding to the two main contacts of the relay (usually the larger ones). By connecting the two contacts, the relay is bypassed and power is sent directly to the starter motor. If it starts, then the relay is faulty, so just replace the relay; if the starter motor does not activate, it could be a faulty starter motor, battery problems, or damaged wiring.

Posted on 9 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Land Cruiser (1996-2002 / MK 8, J90) To replace the starter motor of the Toyota Land Cruiser 90, we start by disconnecting the battery, then we lower ourselves near the starter motor, st…
Toyota Land Cruiser (1990-1997 / MK 7, J80) In this video we can see the position of the fuse boxes of the Toyota Land Cruiser L80: one box is located right next to the steering wheel, on the l…
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos