Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Oil Filter on a Toyota Rav 4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Oil filter

See other generations:
Video tutorial

How to change the oil and oil filter on a Toyota Rav 4? This operation is simple by following the correct steps, here’s how to proceed: lift the car on a column lift (jack), after removing the plastic cover panel, unscrew the oil sump bolt with a socket; let the fluid drain into a disposal container and re-screw the bolt.

Unscrew the oil filter to be replaced (fit a new one). Lower the car and lift the engine bonnet.

Refill the engine with new oil: measure the oil level using the metal dipstick multiple times until the ideal measurement is reached.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Change the engine oil and oil filter on the Toyota RAV 4 VVT-I
Change the engine oil and oil filter on the Toyota RAV 4 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today, this guide will show you how to perform the routine maintenance service by changing the engine oil and oil filter on the Toyota RAV 4 VVT-I. F…
How to change the oil and oil filter in the Toyota Rav 4?
How to change the oil and oil filter in the Toyota Rav 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To change the oil and replace the oil filter in your Toyota Rav 4, the steps are very simple and quick. First, as shown in the video, lift the car on…
How to Change the Engine Oil on a Toyota Rav 4
How to Change the Engine Oil on a Toyota Rav 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this tutorial video, you will learn how to replace the engine oil on a Toyota Rav 4. Once the car is raised, remove the plastic protective cover t…

    Frequently Asked Questions

    • Rav 4 2013-2018 - Where is the Toyota RAV 4 oil filter located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos