Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Toyota Rav 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

See other generations:
Video tutorial

In this tutorial video, you will learn how to replace the engine oil on a Toyota Rav 4. Once the car is raised, remove the plastic protective cover to access the oil sump and the corresponding filter. Position a container to collect the used oil, then unscrew the sump plug and remove the old oil filter.

After allowing the old oil to drain for a few minutes, refit the sump plug and install a new filter. Finally, replace the plastic cover and add new oil.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Engine Oil Change on a Toyota RAV 4
Engine Oil Change on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this short video tutorial, you will see how to change the engine oil on a third-generation Toyota RAV 4. Start by lifting the vehicle and first re…
Change the engine oil and oil filter on the Toyota RAV 4 VVT-I
Change the engine oil and oil filter on the Toyota RAV 4 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today, this guide will show you how to perform the routine maintenance service by changing the engine oil and oil filter on the Toyota RAV 4 VVT-I. F…
How to replace the engine oil and oil filter of the Toyota RAV4
How to replace the engine oil and oil filter of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below we will see the instructions that will allow us to carry out the routine maintenance service of the Toyota RAV 4. First, lift the vehicle and s…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos