Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on a Toyota RAV 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

In this short video tutorial, you will see how to change the engine oil on a third-generation Toyota RAV 4. Start by lifting the vehicle and first remove the plastic protection. Now, place a container under the oil sump and unscrew the nut to let all the used oil drain out, then close everything back up. Next, remove the filter cartridge located next to the sump and replace the filter and gasket before reinstalling the cartridge in its housing.

Once this is done, move to the engine bay and simply add new oil to finish the job.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Toyota Rav 4
How to Change the Engine Oil on a Toyota Rav 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this tutorial video, you will learn how to replace the engine oil on a Toyota Rav 4. Once the car is raised, remove the plastic protective cover t…
How to Change the Oil and Oil Filter on a Toyota Rav 4
How to Change the Oil and Oil Filter on a Toyota Rav 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) How to change the oil and oil filter on a Toyota Rav 4? This operation is simple by following the correct steps, here’s how to proceed: lift the car …
How to Replace the Engine Oil and Oil Filter of a Toyota RAV4
How to Replace the Engine Oil and Oil Filter of a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) These brief steps will show you the procedure for replacing the engine oil and oil filter while performing the routine maintenance service on a Toyot…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos