Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Toyota Estima

Model: Toyota Toyota Various
Part: Headlight bulb

Today's instructions will show us how to disassemble and replace the headlight bulb of the Toyota Estima. First, we open the car's hood and start by removing the plastic bulb protection cap; then we disconnect the electrical connector and release the light from the bulb holder, in order to remove it, as shown in the video. At this point, we install the new low beam bulb, of the correct type and with the same fitting; then we reassemble the bulb and make the connection, replacing the other low beam bulb in the same way.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Toyota Matrix
How to replace the front headlight bulb of the Toyota Matrix
Toyota Toyota Various In the following guide, we will help you complete the replacement of the front headlight bulb of your Toyota Matrix correctly and safely. First of al…
How to reset the service light on Toyota Vans, Trucks, and Sienna vehicles
How to reset the service light on Toyota Vans, Trucks, and Sienna vehicles
Toyota Toyota Various When the service light comes on in Toyota Trucks, Sienna, and Vans, it means that we need to perform a car service. After performing the service, we …
How to replace the license plate light of the Toyota Matrix
How to replace the license plate light of the Toyota Matrix
Toyota Toyota Various If the license plate light of your Toyota Matrix has suddenly stopped working, then you must replace it as soon as possible to avoid getting a fine. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos