Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Toyota Yaris located?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Checks and maintenance

To locate the OBD2 port inside your Toyota Yaris, simply read the following guide and follow the described steps. Start by entering the cabin, then head to the driver's seat and shift your attention to the lower left side of the dashboard. At this point, locate the OBD2 port you were looking for, and the procedure is complete. If necessary, you can proceed to connect a diagnostic tool to the OBD2 port in question to analyze any errors detected by the control unit.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 Port on a 2020 Toyota Yaris?
Where is the OBD2 Port on a 2020 Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) If you own a 2020 Toyota Yaris and want to find the OBD2 port to connect a diagnostic tool for troubleshooting, follow this guide. First, get into th…
Where is the OBD2 port located in the Toyota Yaris?
Where is the OBD2 port located in the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this new guide dedicated to those of you who own a Toyota Yaris first edition, we will explain how you can have free access to the OBD2 port in a …
Where is the OBD2 port located on the Toyota Yaris?
Where is the OBD2 port located on the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) The new generation Toyota Yaris features an OBD2 port, which connects the car to a PC for diagnostics in order to reset warning lights such as the se…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos