Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota Prius MK2 Remote

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

Let’s see how to replace the remote battery for the Toyota Prius MK2: no special tools are required, just the new CR1632 battery which can be found at any electronics store or supermarket (as well as online). First, extract the mechanical key by pressing the side button on the remote, then insert the tip of the mechanical key into the side slot and pry to separate the two halves of the casing.

Once opened, remove the circuit board and use a small screwdriver to pry out the battery from its housing. Place the new battery in with the positive side facing up, replace the circuit board, close the two halves, and test the operation.


Posted on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the Toyota Prius 2
How to Replace the Key Battery in the Toyota Prius 2
Toyota Prius (2009-2015 / Xw30, MK 2) If the smart key for your Toyota Prius Mk2 (2009-2015) has suddenly stopped working and you want to replace the battery inside, simply follow the ste…
How to Replace the Key Battery of the 2014 Toyota Prius
How to Replace the Key Battery of the 2014 Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) If you want to replace the button battery located inside the key of your Toyota Prius second generation (2009-2015), simply follow these steps. First…
How to Replace the Battery of the Toyota Prius Hybrid?
How to Replace the Battery of the Toyota Prius Hybrid?
Toyota Prius (2009-2015 / Xw30, MK 2) To replace the battery of the Toyota Prius Hybrid, lower the rear seats completely. Next, open the tailgate to access the boot and remove the carpet …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos