Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a 2017 Toyota Corolla?

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Service warning light

When the Service light comes on in your 2017 Toyota Corolla, it indicates that the service interval is approaching. You need to change the engine oil and its filter, as stated in the owner's manual, then reset the light as follows: press and hold the button to the left of the odometer while simultaneously turning on the ignition. You will see dashes flashing on the small display within the odometer, which will then turn off. At this point, turn off and then turn on the ignition again. Sequence complete.

Posted on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator light on the Toyota Corolla
How to reset the service indicator light on the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) In this new guide for your Toyota Corolla, we will explain how to manually reset the service light that continues to turn on even after performing th…
How to Reset the Service Light on a Toyota Corolla
How to Reset the Service Light on a Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Resetting the service light on a Toyota Corolla is a straightforward task performed after completing the regular service. First, get into the vehicle…
How to Reset the Service Light on a Toyota Corolla
How to Reset the Service Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) These brief and simple steps will show you how to reset the service light for the regular maintenance oil change on the Toyota Corolla. First, get in…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos