Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Toyota Land Cruiser?

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part:

In this tutorial, you will see how to reset the tyre warning light on the Toyota Land Cruiser, a very simple and quick operation to perform only after restoring the correct pressure in each tyre as indicated in the manual. First, enter the cabin, then insert the key and turn on the instrument panel. Next, locate the "SET" button located at the bottom of the dashboard on the driver’s side, hold it down until the warning light disappears from the panel, and complete the procedure by restarting the vehicle.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Toyota Land Cruiser?
How do you reset the tire pressure light on the Toyota Land Cruiser?
Toyota Land Cruiser (2021-2026 / J300) To reset the tire pressure warning light of the Toyota Land Cruiser, first inflate the tires until they reach the recommended pressure value: this ca…
How do you reset the tire pressure warning light on the Toyota Land Cruiser?
How do you reset the tire pressure warning light on the Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / J200, MK 11) To completely make the tire pressure warning light of the Toyota Land Cruiser disappear, you need to inflate the tires until they reach the recommend…
How to Reset the Tyre Warning Light on a Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / J200, MK 11) In this tutorial, you will see how to reset the tyre warning light on a Toyota Land Cruiser, a very simple and quick operation, to be done only once …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos