Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Hilux?

Model: Toyota HiLux MK 8, An130, An120 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

You can completely eliminate the Service light displayed on the instrument cluster by activating the cluster, inserting the appropriate key into the ignition, and then pressing the button located at the center of the cluster, setting it to "Trip A." Once this message appears on the display, you can turn off the ignition and hold down the button in the center of the cluster.

Then, press the ignition button while continuing to hold the center button: after the reset occurs, you can turn off the ignition by removing the key from the ignition switch.


Posted on 27 July 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Toyota Hilux?
How to Reset the "Service" Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) Hello, today’s goal is to reset the "Service" light on our Toyota Hilux. Start by sitting in the driver’s seat. Once seated, press the ignition butto…
How to Reset the Service Light on a Toyota Hilux
How to Reset the Service Light on a Toyota Hilux
Toyota HiLux (2015-2024 / MK 8, An130, An120) Today's guide will show you the steps to reset the service light for the routine maintenance oil change on a Toyota Hilux. First, get in the vehicle …
How to Reset the Service Light on the Toyota Hilux?
How to Reset the Service Light on the Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) You can reset the Service light displayed on the instrument panel of the Toyota Hilux by pressing and holding the button located at the bottom center…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos