Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Avensis

Model: Toyota Avensis T250, MK 2 - Years 2003-2008
Part: Service warning light

How do you reset the service light on a Toyota Avensis? Follow these steps. Turn on the car's ignition, using the button located to the left of the instrument cluster. Press the button until the maintenance reset message disappears, then turn off the ignition. Turn the ignition back on with the key; the maintenance message will appear along with the mileage for the next reset (if available). Double-check everything and turn off the ignition after setting. Perform the settings with the vehicle stationary and the engine off.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Toyota Avensis
How to Reset the Service Light on a Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) With the instructions in this guide, you can manually reset the service light that appears on the instrument cluster of your Toyota Avensis. The enti…
How to Reset the Service Light on the Toyota Avensis
How to Reset the Service Light on the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Here are the instructions and steps on how to reset the service and maintenance light on the Toyota Avensis. First, get in the vehicle and switch on …
How to reset the service light on the Toyota Avensis
How to reset the service light on the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) The reset of the service light of the Toyota Avensis is a very simple operation that is always carried out after performing the service. The first th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos