Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Number Plate Light Replacement on Toyota Avensis

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

Remove the number plate light from a Toyota Avensis. Use a plastic lever to detach the rear panel of the tailgate; disconnect the power connectors from the light.

Once the light is removed, take out the bulb. Fit the new/LED bulb (same size and voltage) into the holder, then refit the light into the tailgate pressing until the clips lock into place.

After securing the light, test the new bulbs by turning on the lights. Close the tailgate with the panel.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How do you replace the license plate light on the Toyota Avensis?
How do you replace the license plate light on the Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) One thing is for sure, walking around with the license plate light of your car not working, besides being dangerous, puts us at risk of being fined, …
How to Replace the Rear Light Bulb on a Toyota Avensis
How to Replace the Rear Light Bulb on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) To replace the rear light bulb on a Toyota Avensis, open the rear hatch to access the components inside the boot. Here, you will locate the internal …
How to Reset the Service Light on a 2012 Toyota Avensis
How to Reset the Service Light on a 2012 Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Typically, the orange service light on your Toyota Avensis third generation (2009-2018) turns off automatically after the regular service is performe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos