Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate light on the Toyota Avensis?

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

One thing is for sure, walking around with the license plate light of your car not working, besides being dangerous, puts us at risk of being fined, so the best thing to do is to replace it. But how to do it? The video available here shows us how: With a small flathead screwdriver, we pry open the glass of the small dome light, installed in the rear hatch, of the aforementioned license plate light and remove it, then we grab the bulb and extract it from the socket.

At this point, all that remains is to insert the new bulb, test it, and reassemble the glass mentioned earlier.

A job within everyone's reach and easy to perform.


Posted on 31 July 2025 by ScegliAuto


Related tutorials

Number Plate Light Replacement on Toyota Avensis
Number Plate Light Replacement on Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Remove the number plate light from a Toyota Avensis. Use a plastic lever to detach the rear panel of the tailgate; disconnect the power connectors fr…
How to Replace the Rear Light Bulb on a Toyota Avensis
How to Replace the Rear Light Bulb on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) To replace the rear light bulb on a Toyota Avensis, open the rear hatch to access the components inside the boot. Here, you will locate the internal …
How to Remove the Battery on a Toyota Avensis
How to Remove the Battery on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Replace the damaged battery of a Toyota Avensis. Open the front bonnet of the car (the battery is located in the engine compartment) and remove the p…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos