Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Gear Knob on Toyota Avensis

Model: Toyota Avensis T250, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Shift knob

See other generations:
Video tutorial

Is the gear knob on your Toyota due for replacement? Here’s how to remove it from the gear stick. Use a lever to detach the trim covering the central tunnel up to the ashtray, then grasp the gear knob and unscrew it until it is removed from the gear stick (cut the plastic tie). For reassembly, fit the new leather gaiter, take the new knob and slide it onto the stick in the central tunnel, then screw it onto the stick.

Secure the gaiter with the tie. Test the correct installation of the knob by moving the stick in the central tunnel. Keep the gear numbering vertical.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Toyota Avensis?
How to Replace the Gear Knob on a Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) Replacing the gear knob on a Toyota Avensis, as shown in this tutorial, is an extremely simple and quick task. First, enter the cabin, then grip the …
How to Remove the Original Radio from a Toyota Avensis
How to Remove the Original Radio from a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) Learn how to remove the original radio from a Toyota Avensis. First, use a plastic trim tool to remove the horizontal trim above the radio, then, usi…
How to Remove the Door Panel on a Toyota Avensis
How to Remove the Door Panel on a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) How to remove the door panel on a Toyota Avensis. Before starting the disassembly, disconnect the battery terminals located in the boot. Remove the p…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos