Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Courtesy Light Bulb on a Toyota Corolla

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Interior dome light bulb

Do you want to replace the bulb for the interior light? Start by removing the light unit from a Toyota Corolla. Pry between the light unit and the protective lens (without breaking anything), then pull out the transparent lens from the light unit. Replace the damaged bulb with a new one (same size and voltage). Refit the lens into the light unit (push the transparent plastic with your hands until the tabs are fully locked into the side plastic). Test the correct operation of the light unit after reassembly. Remove the entire light unit if you want to replace it.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Antenna on a Toyota Corolla
Replacing the Antenna on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Here are step-by-step instructions on how to remove and replace the antenna on a Toyota Corolla. First, remove the two plastic clips on the headlinin…
How to Replace the Headlining on a Toyota Corolla
How to Replace the Headlining on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) To remove the headlining on a Toyota Corolla, you must first disassemble all components that prevent its removal: these include the interior rear-vie…
How to Replace the Number Plate Bulb on a Toyota Corolla?
How to Replace the Number Plate Bulb on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To replace the number plate bulb on a Toyota Corolla, lift the tailgate. This will allow you to use a tool to detach the internal carpet lining of th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos