Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Tire warning light reset on Toyota Corolla

Toyota Corolla - Video tutorial

Model: Toyota Corolla E210, MK 5 - Years 2019-2024
Part: Instrument cluster
Operation: Tire warning light reset on Toyota Corolla

Turn on the instrument panel with the appropriate ignition key. By opening the door you will find on the lower pillar the numbers regarding the recommended pressure for your tires: before carrying out the reset procedure, therefore, check with a special pressure gauge that the pressure in at least one of them has not actually decreased too much, and obviously check that there are no punctures or various damages. Once this is done, use the arrows on the steering wheel, on the left, to scroll through the various sections of the menu: click the "up" arrow once, then use the horizontal arrows to scroll through the pages to the settings item, then go to "vehicle settings" and click ok, enter the tpws entry and click ok again.


Posted on 12 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Corolla 2019-2026 - How do you reset the tire pressure light on a Toyota Corolla? Read Answer
    • Corolla 2013-2019 - How do you reset the tire pressure warning light on a Toyota Corolla Mk4? Read Answer
    • Corolla 2006-2013 - What does the warning light with a Toyota Corolla 3 wrench mean? Read Answer
    • Corolla 2019-2026 - What does the PS light on Toyota Corolla mean? Read Answer
    • Corolla 2013-2019 - How does the tire pressure gauge work on Toyota Corolla? Read Answer
    • Corolla 2019-2026 - What to do when the Toyota Corolla tire pressure warning light comes on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos