Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

In this video tutorial, you will learn how to disassemble and replace the battery of the key fob on a third-generation Toyota RAV 4. First, take your key fob and lever the sides with something thin, like a flat screwdriver, to open the two halves of the fob; then access the circuit board and the battery, as shown in the video.

At this point, replace it with a new one of the correct type (in this case, a CR 2032 3V); simply insert it in the correct orientation and reassemble the key fob!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Replacing the Remote Battery on a Toyota Rav 4
Replacing the Remote Battery on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide shows you how to replace the battery in the remote control of a third-generation Toyota Rav 4. First, extract the physical emergency key b…
How to Replace the Key Fob Battery on the Toyota RAV4
How to Replace the Key Fob Battery on the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today, we will go through the instructions for removing and replacing the battery in the key fob for the Toyota RAV4. First, take the key fob and pre…
Replacing the Remote Battery of the Toyota RAV 4
Replacing the Remote Battery of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Briefly follow the procedure to disassemble and replace the battery of the key remote for the Toyota RAV 4. First, take the remote in hand and start …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos