Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Light Bulb on a Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

This guide shows how to replace the daytime running light bulb on a 2010 Toyota Corolla. The first step is to open the bonnet and position yourself in front of the headlamp you wish to work on. Simply unscrew the bulb connector counterclockwise and remove the assembly.

By pressing the black lever on the connector, you can extract the bulb and the bulb holder; it is advisable to perform this operation without a screwdriver to avoid damaging the plastic. The replacement is very simple; just align the new bulb with the connector and push it into position.

Insert the bulb holder into the headlamp and screw it in clockwise, ensuring the piece is properly seated. At this point, the operation is complete.

The bulb model is the Sylvania 9005.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to turn on the headlights on a Toyota Corolla?
How to turn on the headlights on a Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) To turn on the headlights on a Toyota Corolla, follow these steps. First, ensure you are seated in the car with the ignition key inserted. To turn on…
How to Replace the Boot Light Bulb of the Toyota Corolla
How to Replace the Boot Light Bulb of the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Follow these instructions to remove and replace the light bulb in the boot of the Toyota Corolla. First, open the rear boot lid and begin to unclip t…
How to replace the headlight bulb of the Toyota Corolla
How to replace the headlight bulb of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the front headlight bulb of your new Toyota Corolla is really very simple. To complete the operation in question, just read the following g…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos