Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Auxiliary Belt on the Toyota Corolla 1.8 (2015)

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: V-belt

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions that will allow you to remove and replace the auxiliary belt on the 2015 Toyota Corolla with a 1.8 engine. First, open the bonnet of your car and loosen the belt tensioner using a 14 mm spanner; then remove the V-belt, as shown in the video.

At this point, replace it with the correct new one; pull the tensioner and correctly fit the new belt, following the video tutorial to the end to understand the steps!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Time the Engine of a Toyota Corolla
How to Time the Engine of a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) Here are the main details needed to time and replace the timing belt on a Toyota Corolla. In this case, the disassembly and replacement of the timing…
Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Replacing the Serpentine Belt on the Toyota Corolla 1.8 VVT-I
Toyota Corolla (2006-2013 / MK 3) In today's video, you will see how to remove and replace the serpentine belt on the Toyota Corolla 1.8 VVT-I by following these simple steps. First, …
Removing the Timing Chain Tensioner on the Toyota Corolla
Removing the Timing Chain Tensioner on the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Today's brief instructions will show you the procedure for removing and replacing the timing chain tensioner on the Toyota Corolla. First, open the v…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos