Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Toyota Camry

Model: Toyota Camry Xv40 - Years 2006-2013
Part: Engine oil

As the first step, park on a ramp or lift the vehicle with a jack to avoid having to go under the car. After locating the oil drain plug, proceed to unscrew it and do the same with the oil pan drain plug, indicated by a simple bolt. First, take a drain pan and place it under the oil pan plug, allowing the oil to drain for several minutes. Now, you need to add new oil to the engine and use the appropriate dipstick to check the oil level. Finally, start the vehicle for about ten minutes and then turn it off, and check the oil level again with the dipstick.

Updated on 8 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil Filter in a Toyota Camry
How to Change the Engine Oil Filter in a Toyota Camry
Toyota Camry (2011-2019 / Xv50) To change the engine oil filter in a Toyota Camry, lift the front of the vehicle using a jack and place safety stands. Position a container under the…
How to reset the oil light on the 2005 Toyota Camry
How to reset the oil light on the 2005 Toyota Camry
Toyota Camry (2002-2006 / Xv30) If you own a 2005 Toyota Camry and want to learn how to correctly and quickly reset the engine oil light on the dashboard, all you have to do is read…
Resetting the service light on the Toyota Camry
Resetting the service light on the Toyota Camry
Toyota Camry (2006-2013 / Xv40) When it is time to change the engine oil in the Toyota Camry, an orange warning light on the instrument panel serves as a reminder. Once the replacem…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos