Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Toyota Highlander

Model: Toyota Highlander Xu20 - Years 2001-2007
Part: Tire pressure warning light

If you have just inflated the tyres on your Toyota Highlander, but the warning light continues to illuminate, you must perform a brief reset procedure to eliminate it permanently. First, insert the key and turn it to position two to power on the ignition. Next, locate the small "Tyre Set" button situated at the lower area of the dashboard (near the steering wheel) and hold it down for a few seconds. Once the TPMS light turns off, release the button and press it one last time immediately after. Wait for the light to flash three times in succession, and finally, turn off the ignition.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the TPMS light on the Toyota Highlander
Resetting the TPMS light on the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) Today's instructions will allow us to reset the TPMS light on the Toyota Highlander; before resetting the tire pressure light, it is necessary that a…
Reset of the tire pressure warning for the Toyota Highlander.
Reset of the tire pressure warning for the Toyota Highlander.
Toyota Highlander (2001-2007 / Xu20) The steps outlined in this guide will allow us to reset the tire pressure warning for the Toyota Highlander. Before performing the reset of the TPMS …
How to Reset the TPMS Light on the 2007 Toyota Highlander
How to Reset the TPMS Light on the 2007 Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) To reset the TPMS light on your first-generation 2007 Toyota Highlander independently and correctly, simply follow the procedure described in this gu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos