Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Door Lock on the Toyota 4Runner

Model: Toyota 4runner N180 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Door lock

See other generations:
Video tutorial

Today, in this tutorial video, you will learn how to remove and replace the front door lock on the Toyota 4Runner. First, open the front door and start by unscrewing the screws located on the door panel, specifically on the opening handle and the sides; then, pry off the sides to remove it, disconnecting the electrical connector found at the back.

Next, unscrew the screws of the door lock to remove it along with the handle; separate the lock cylinder by removing the small retaining clip, and replace it with the new one!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel on a Toyota 4Runner
How to Remove the Rear Door Panel on a Toyota 4Runner
Toyota 4runner (2010-2024 / N280) In this tutorial, you will see how to remove the rear door panel on a Toyota 4Runner, a very simple and quick operation. First, open the door in ques…
How to Replace the Front Bumper on the Toyota 4Runner
How to Replace the Front Bumper on the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) This guide shows you how to remove and replace the front bumper on the Toyota 4Runner by following the instructions below. First, lift the vehicle an…
How to Replace the Outside Rearview Mirror on a Toyota 4Runner?
How to Replace the Outside Rearview Mirror on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) To replace the outside rearview mirror on a Toyota 4Runner, first remove the corresponding door panel: this can be done by unscrewing the screws loca…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos