Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Toyota Tacoma?

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

As we can see in this tutorial, replacing the remote battery in a Toyota Tacoma is a very simple and quick task. To do this, you will only need a small flathead screwdriver and a replacement CR2032 battery.

To open the remote, pry with the tip of the screwdriver in the indicated slot located on the lower ring. Once the cover is unlocked, remove it completely and take out the central module, where the battery is located on the back.

At this point, you can proceed with the replacement, ensuring that the new battery is positioned in the correct orientation.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Toyota Tacoma?
How to Replace the Remote Battery of the Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the remote battery of the Toyota Tacoma, pry open the bottom of the device using a tool like a screwdriver. Once the device is open, you c…
How to Replace the Key Fob Battery on a Toyota Tacoma?
How to Replace the Key Fob Battery on a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the battery in the key fob of a Toyota Tacoma, you need to remove the cover located on the top of the device: once this small panel is rem…
How to Replace the Remote Battery of the Toyota Tacoma N300
How to Replace the Remote Battery of the Toyota Tacoma N300
Toyota Tacoma (2016-2026 / N300) This guide shows you how to disassemble and replace the battery of the remote key for the Toyota Tacoma N300 by following these simple steps. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos