Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on the Toyota Rush?

Model: Toyota Rush J300, F800 - Years 2017-2024
Part: Fog lights

To replace the fog light bulb on the Toyota Rush, open the hood to access the components inside the engine bay. Specifically, disconnect the connector attached to the bulb so that it can be removed from its housing. After disconnecting the connector, connect the new bulb to it and then insert it back into the light assembly. After installation, close the hood and check that the new device functions correctly.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on the Toyota Rush
How to Replace the Cabin Air Filter on the Toyota Rush
Toyota Rush (2017-2024 / J300, F800) In this brief guide, learn how to replace the cabin air filter on the Toyota Rush. First, get inside the vehicle on the passenger side and begin remo…
How to Replace the Rear Shock Absorber in a Toyota Rush?
How to Replace the Rear Shock Absorber in a Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the rear shock absorber in a Toyota Rush, lift the vehicle with a jack or lift so that the corresponding wheel is off the ground: this wil…
How to Replace the Air Filter in the Toyota Rush?
How to Replace the Air Filter in the Toyota Rush?
Toyota Rush (2006-2017 / J200, F700) To replace the air filter in the Toyota Rush, open the hood to access the box located just below the windshield. You can open the box by releasing th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos