Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Honda C-HR?

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, see how to replace the cabin air filter in the Toyota C-HR, a very simple and quick operation. To access the filter, which is located behind the glove compartment on the passenger side, open the drawer and unclip the two pins from the dashboard by pressing the corners inward.

Next, also unclip the damper located on the right, lay the drawer on the floor, and remove the long rectangular cover. At this point, you can extract the old filter and fit the replacement, simply following the reverse procedure.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Toyota C-HR
Replacing the Cabin Air Filter on the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Among routine maintenance tasks, it is necessary to replace the cabin air filter; let's see how to perform this operation on the Toyota C-HR. First, …
How to Replace the Air Filter on a Toyota C-HR
How to Replace the Air Filter on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this video tutorial, we can see how to replace the air filter on a Toyota C-HR. The first thing to do is to purchase a new air filter. Get inside …
Replacement of the engine air filter for the Toyota CH-R
Replacement of the engine air filter for the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Below we will see the instructions that will allow us to disassemble and replace the engine air filter of the Toyota CH-R. First, we open the hood of…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos