Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sequoia
  6. : How do you replace spark plugs on Toyota Sequoia?

Toyota Sequoia - Video tutorial

Model: Toyota Sequoia Xk30, Xk40 - Years 2001-2007
Part: Spark plugs
Operation: How do you replace spark plugs on Toyota Sequoia?

To be able to replace the spark plugs on the Toyota Sequoia you need to go and open the bonnet so that you have access to the components inside the engine compartment: in the upper part of the engine block it will be possible to identify the connectors connected to the injectors, which must be disconnected allowing unscrew the screws that fix the injectors in their housing. After the injectors have been freed, it will be possible to use a socket wrench to extract the underlying spark plugs, replacing them with new spare parts; after the replacement, all the previously removed components can be mounted.


Posted on 18 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos