Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Before you start replacing the battery in your car, remember that this operation must be done with the engine off for safety reasons. Wear rubber gloves, unlock the front bonnet, and lift it fully.

Locate the battery and, using a 10 mm spanner, remove the two terminals, starting with the negative one. The positive terminal usually has a red cover, while the negative is black. Using the same spanner, unscrew the two screws holding the safety block and remove it. Now, simply take out the old battery and replace it with the new one. Reattach the two terminals and the safety block correctly.

Finally, close the bonnet.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Toyota Corolla key
How to replace the battery of the Toyota Corolla key
Toyota Corolla (2000-2007 / MK 2) The steps to replace the battery of the Toyota Corolla remote control are simple and quick to perform. Before proceeding, let's get a CR 2032 model b…
Battery Replacement for the Toyota Corolla
Battery Replacement for the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In today's tutorial video, we will see how to remove and replace the battery in the Toyota Corolla, following the instructions below. First, open the…
How to Replace the Battery in a Toyota Corolla
How to Replace the Battery in a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) In this brief and simple guide, follow the steps to remove and replace the battery in a Toyota Corolla. First, open the bonnet and disconnect the two…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos