Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Highlander
    4. : Restoration of the ISC of a 2008 Toyota Highlinder

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Checks and maintenance
Operation: Restoration of the ISC of a 2008 Toyota Highlinder

The video shows how to carry out the ISC reset operation of a 2008 Toyota Highlinder Hybrid. The ISC valve is usually located in the intake duct, to be exact in the intake by-pass duct, and chokes the incoming air. The reset is done on the computer and makes sure that the values related to this valve are perfect. To do this, start the vehicle, hold the brake and then press the throttle to rev the engine for approximately 30 seconds, until the battery is half charged. Then turn off the engine, wait a few seconds and then turn the vehicle back on. At this point the restoration is complete.


Posted on 22 July 2022 by ScegliAuto



Where are the fuses located in the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) In this new mini guide dedicated to all Toyota Highlander owners (year 2008-2013), we will discover where the interior fuses are located. Before proc
How to reset the Toyota Highlander TPMS light
Toyota Highlander (2008-2013 / Xu40) If you have just inflated all the tires of your Toyota Highlander (2008-2013) but the relative warning light continues to come on at every start, the
How to replace the headlight bulbs in the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) Replacing the headlight bulbs in the Toyota Highlander is a very simple and fast operation, let's see how to proceed in this tutorial. First make sur

How to open the seat of a scooter without the key

If we have to open the saddle on a scooter when we do not have the key, we can find the necessary information and useful information on how to move in the description below and also in the video. The saddle is normally opened by inserting the key in the dashboard and pressing the appropriate control. If we do not have the key available, we can still open it by removing the panel which is placed immediately under the saddle where we rest our feet and intercept the opening cable and then pull it manually. This way the saddle will open.

Watch the video!


by ScegliAuto

More videos