Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Light bulb

See other generations:
Video tutorial

Replacing the rear indicator bulb does not require disassembling the light unit; simply access the boot, open the side glove compartment door, remove the protection cap, and access the light unit; then unclip the bulb holder and extract the old bulb by pulling it out (T5 all-glass fitting); insert the new bulb: it is advisable to check its proper functioning by activating the indicator and then proceed to reposition the bulb holder in its respective seat in the light unit.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulb on a Toyota Rav4?
How to Replace the Rear Headlamp Bulb on a Toyota Rav4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To replace the rear headlamp bulb on a Toyota Rav4, open the tailgate of the boot so that the screws on either side of the lamp can be loosened. This…
How to replace the rear headlight bulb of the Toyota RAV4
How to replace the rear headlight bulb of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The steps to replace the rear light bulb of the 2019 Toyota RAV 4 are simple and quick to perform independently. The first step is to open the trunk …
Replacing Rear Brake Light Bulb on Toyota Rav4
Replacing Rear Brake Light Bulb on Toyota Rav4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this video tutorial, you will see instructions on how to remove and replace the rear brake light bulb on a third-generation Toyota Rav4. First, op…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos