Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Toyota RAV4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light bulb

See other generations:
Video tutorial

The steps to replace the rear light bulb of the 2019 Toyota RAV 4 are simple and quick to perform independently. The first step is to open the trunk of the vehicle.

The second step is to remove the plastic cover of the bulb, located on the tailgate. The third step is to disconnect the worn bulb from the connector.

The fourth step is to connect the new bulb to the connector and close the plastic cover. The fifth step is to close the trunk and turn on the car lights to test their operation.


Posted on 14 January 2025 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…
How to Remove the Rear Light on a Toyota RAV4?
How to Remove the Rear Light on a Toyota RAV4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) As shown in this tutorial, removing the rear light on a Toyota RAV4 to replace a faulty bulb is a very simple and quick task. First, ensure the key i…
How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Below we will see the information that will allow us to disassemble and replace the headlight bulb of the Toyota RAV4. First, we open the hood of the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos