Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Caliper Inspection/Cleaning

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake pads

See other generations:
Video tutorial

For brake system maintenance, start by lifting the vehicle on a ramp and removing the front wheels; then undo the caliper mounting bolts and slide it off the bracket; next, remove the old brake pads, clean and lubricate the sliding plates, the rubber of the cylinder, and the caliper sliding pins.

Generally, it is not necessary to disconnect the brake fluid pipe from the caliper unless you notice leaks from the rubber of the cylinder; however, if you want to clean the caliper, you need to extract the piston by pressing it out from the pipe seat, thoroughly clean the piston and its seat, lubricate the internal seals and the piston with specific grease, and reinsert it into its seat, removing the circlip and the rubber boot to apply when the piston is halfway through its stroke to complete its retraction.

Reconnect the brake fluid pipe to the caliper, insert the new pads, refit the caliper, and restore the fluid level by bleeding through the appropriate valve.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Front Disc and Pad Replacement
Front Disc and Pad Replacement
Toyota Yaris (1999-2005 / Xp10) Once the vehicle is lifted on a hydraulic lift, remove the front wheel; then proceed to remove the retaining pins of the brake caliper and detach it …
Replacement of Front Brake Discs and Pads
Replacement of Front Brake Discs and Pads
Toyota Yaris (1999-2005 / Xp10) Lift the vehicle on suitable axle stands and remove the front wheels (unscrew the wheel fixing bolts before lifting the vehicle); then unscrew the fi…
Engine Oil Replacement for Toyota Yaris 1.0 Petrol
Engine Oil Replacement for Toyota Yaris 1.0 Petrol
Toyota Yaris (2005-2011 / Xp90) When replacing the engine oil and its filter, consider using specific additives that can enhance engine performance and resolve or mitigate any oil c…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos