Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement for Toyota Yaris 1.0 Petrol

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

When replacing the engine oil and its filter, consider using specific additives that can enhance engine performance and resolve or mitigate any oil consumption issues; the first step is to add the cleaning additive for the lubrication channels into the old oil and run the engine for a few minutes; then drain the used oil, replace the filter, fill the engine with new oil, adding the stabilising additive; clean the intake channels and throttle body, replace the air filter and spark plugs, and add the injector cleaning additive to the tank; the result will be impressive.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Toyota Yaris (1999-2005 / Xp10) Today we will see how to remove and replace the fuel pump of a first series 1.0 Petrol Toyota Yaris. First, recline the front seats and the rear seat…
How to Change the Air Filter on the Toyota Yaris
How to Change the Air Filter on the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replacing the air filter on the Toyota Yaris 1.0 petrol is very simple. First, open the bonnet and remove the four clips that secure the engine cover…
Engine Oil Change for Toyota Yaris 1.3 VVT-i
Engine Oil Change for Toyota Yaris 1.3 VVT-i
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will learn how to remove and replace the engine oil in a Toyota Yaris 1.3 VVT-i. First, lift the vehicle and remove the oil dra…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos