Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Seatbelt Alarm in the Toyota Hi Lux

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Onboard computer

See other generations:
Video tutorial

Before discovering how to properly disable the seatbelt alarm in the Toyota Hi Lux, remember that this operation should only be performed when necessary, such as for maintenance or replacement of the seatbelts. First, insert the key and turn on the vehicle's electrical system, making sure not to start the engine and especially not to wear the seatbelt.

Then, press the button located below the speedometer multiple times until you see "ODO" on the mini display. At this point, turn off the electrical system.

Partially insert the seatbelt into the latch system. Turn the electrical system back on while simultaneously holding down the same button used earlier.

Finally, release it as soon as you hear a beep. To reactivate the alarm, simply press the button again.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2012 Toyota HiLux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) If you have a 2012 Toyota HiLux and don't know where the fuse box is located, follow the steps below to find it easily. First, make sure you have par…
How to activate and deactivate traction control on the Toyota Hilux
How to activate and deactivate traction control on the Toyota Hilux
Toyota HiLux (2015-2024 / MK 8, An130, An120) In this guide we will see the instructions that will allow us to activate and deactivate the traction control (TRC) on the Toyota Hilux, in simple an…
How to Disable the Traction Control on a Toyota Hilux
How to Disable the Traction Control on a Toyota Hilux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) This brief and simple guide will show you how to disable the traction control on a Toyota Hilux. Disabling traction control is useful when driving on…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos