Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Toyota Highlander?

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

As shown in this tutorial, replacing the remote battery of the Toyota Highlander is a very simple task. You will need a replacement CR2016 battery and a small flathead screwdriver.

First, insert the screwdriver tip into the slot on the upper ring. Next, pry open the two halves of the remote, fully open it, and remove the central module, which you will then open as well.

At this point, you can replace the battery and reassemble everything by following the reverse procedure.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the Toyota Highlander?
How to Replace the Remote Battery on the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this tutorial, you will see how to replace the remote battery on the Toyota Highlander. For this simple operation, you will need a small flat-head…
Replace the Key Fob Battery of the Toyota Highlander
Replace the Key Fob Battery of the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) Follow these steps to disassemble and replace the battery of the key fob for the Toyota Highlander. First, take your key fob and remove the physical …
How to replace the remote control battery for the Toyota Highlander?
How to replace the remote control battery for the Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) To replace the remote control battery for the Toyota Highlander, slide the key out from the bottom of the device by lowering the corresponding lever:…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos