Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to replace the engine air filter on Toyota Rav 4

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Air filter
Operation: How to replace the engine air filter on Toyota Rav 4

In order to replace the engine air filter on the car, it is necessary to proceed as follows: open the bonnet, the air filter is located on the left side, to open the box that contains it, it is necessary to unhook the metal clips to block the cover and lift it (pay attention to the electrical wiring of the air pressure sensor). Then extract the filter from its seat and take the new one (always first check the filter specifications that are suitable for the car model). Finally reposition the lid of the box and reattach the metal clips.


Posted on 21 November 2022 by ScegliAuto



How to replace the air filter in the Toyota Rav-4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In today's video, we will see how to replace the air filter in the third-generation Toyota Rav-4. First of all, we recommend proceeding only with a c
How to remove the air filter Toyota Rav 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Remove the worn air filter on a Toyota Rav 4. We replace the piece placed inside the engine compartment. We open the car door, pull up the engine com
How to replace the air filter on Toyota RAV 4 VVT-I MK4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's find out in this short and simple guide how to remove and replace the engine air filter of the Toyota RAV 4 fourth series, with VVT-I engine. F

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos