Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Glanza
  6. : How to fit the additional bumper corner protectors on Toyota Glanza?

Toyota Glanza - Video tutorial

Model: Toyota Glanza MK 1 - Years 2019-2024
Part: Rear bumper
Operation: How to fit the additional bumper corner protectors on Toyota Glanza?

To customize the car, it is possible to purchase protective profiles for the corners of the front and rear bumpers. Let's see below how to apply them, the procedure is very simple because the profiles are adhesive. First position the profile, marking the precise position with a highlighter, then remove the protective film from the adhesive and place the profile on the bodywork and apply pressure with your hands to make it adhere perfectly. Repeat the same procedure to mount the other profile on the opposite corner and obviously also to mount the other two profiles on the other bumper.


Posted on 22 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos