Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Toyota Tacoma

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Battery

See other generations:
Video tutorial

To proceed with the battery replacement on this vehicle, you can find the instructions in this description and confirm them with the images in the video. The first step is to open the hood and locate the battery at the top of the engine compartment.

Then, disconnect the negative terminal first, followed by the positive terminal. Use a socket wrench to unscrew the nuts securing the battery support bracket.

At this point, you can remove the battery from its housing and place the new one. Reconnect the positive terminal first, then the negative terminal, and finally tighten the nuts for the upper support bracket.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Toyota Tacoma?
How to Replace the Remote Battery of the Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the remote battery of the Toyota Tacoma, pry open the bottom of the device using a tool like a screwdriver. Once the device is open, you c…
How to Change the Battery on a Toyota Tacoma
How to Change the Battery on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) Follow these instructions to replace the battery on this vehicle model. After opening the hood, locate the battery on the left side. Grab a wrench to…
How to Replace the Battery in a Toyota Tacoma
How to Replace the Battery in a Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) The video explains the steps on how to replace the battery in a Toyota Tacoma pickup truck. As the first step, ensure the vehicle is off and open the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos