Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on the Toyota Highlander

Model: Toyota Highlander Xu20 - Years 2001-2007
Part: Air filter

If you want to attempt replacing the engine air filter on this vehicle, you will find the instructions below and can also refer to the video tutorial. After opening the bonnet, locate the filter housing on the left side of the engine bay. Disconnect the air pressure sensor connector and unclip the clips securing the cover of the filter housing. Lift the cover, remove the old filter, and position the new one. Close the cover, reclip the clips, and reconnect the air sensor connector.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter of the Toyota Highlander V6 Xu 20
How to Replace the Air Filter of the Toyota Highlander V6 Xu 20
Toyota Highlander (2001-2007 / Xu20) In this video, follow the steps to remove and replace the engine air filter of the Toyota Highlander Xu 20 with a V6 engine. First, open the bonnet a…
Replacing the cabin air filter on a Toyota Highlander
Replacing the cabin air filter on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) This guide provides instructions for removing and replacing the cabin air filter on a Toyota Highlander. First, get inside the vehicle on the front p…
Replacing the cabin air filter on the Toyota Highlander Xu40
Replacing the cabin air filter on the Toyota Highlander Xu40
Toyota Highlander (2008-2013 / Xu40) Today we will see, in this video tutorial, how to remove and replace the cabin air filter on the Toyota Highlander Xu40. First, open the front passen…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos