Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Toyota Venza 2.7 L

Model: Toyota Venza MK  1, Av10 - Years 2008-2017
Part: V-belt

Let's go through the steps on how to disassemble and replace the serpentine belt on the Toyota Venza with a 2.7 L engine. First, lift the vehicle and start unscrewing the bolts of the right front wheel to remove it; then unscrew the fender screws using a 10 mm wrench, and loosen the serpentine belt tensioner with the same wrench to remove the belt, as shown in the video. At this point, install the new serpentine belt correctly; release the tensioner and reassemble the fender and wheel!

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Toyota Venza 2
How to reset the service light on the Toyota Venza 2
Toyota Venza (2020-2026 / MK  2, Xu80) To complete the manual reset of the service light on the instrument panel of your second generation Toyota Venza, you must follow the steps described…
How to Replace the Air Filter on a Toyota Venza?
How to Replace the Air Filter on a Toyota Venza?
Toyota Venza (2008-2017 / MK  1, Av10) To replace the air filter on a Toyota Venza, open the hood to locate the air filter box on the right side of the engine block. Release the retaining …
How do you reset the tire pressure light on the Toyota Venza?
How do you reset the tire pressure light on the Toyota Venza?
Toyota Venza (2008-2017 / MK  1, Av10) To reset the tire pressure warning light on the Toyota Venza, you need to inflate the tires to the recommended pressure value: this value is indicate…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos