Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the 12 V Battery of the Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

Today we will discover the steps to remove and replace the 12 V battery of the Toyota C-HR. First, open the bonnet and start removing the plastic cover of the battery; then use a socket wrench with an extension to unscrew the screw found at its base, as well as the one for the bracket, as shown in the video.

At this point, disconnect both battery terminals (positive and negative) to remove it and replace it with a new one of the correct type and same amperage; reconnect and test the ignition and operation of the start/stop system if applicable!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Control Battery on a Toyota C-HR?
How to Replace the Remote Control Battery on a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To replace the remote control battery on a Toyota C-HR, press the button on the top of the device to extract the key from its housing. Once the key i…
How to Change the Battery in My Toyota C-HR Remote Key?
How to Change the Battery in My Toyota C-HR Remote Key?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) When you need to replace the battery in your Toyota C-HR key, this video will be very helpful. First, press the button on the top to extract the meta…
Replacing the Key Battery on a Toyota C-HR
Replacing the Key Battery on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To replace the battery in your remote, locate the button on the bottom and extract the emergency blade. Holding the key with the Toyota symbol facing…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos