Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light in the Toyota 4Runner?

Model: Toyota 4runner N280 - Years 2010-2024
Part: Service warning light

Resetting the oil service light in the Toyota 4Runner is a very simple and quick operation; let's see how to proceed in this tutorial. Before doing this, ensure you have completed all required maintenance tasks. Start by inserting the key and turning on the ignition, then, using the button located under the speedometer, switch the odometer display to the "Trip A" option. Next, turn off the ignition and turn it back on while holding the same button, releasing it only at the end of the countdown. Finally, start the vehicle.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Oil Service Light in the Toyota 4Runner?
How to Reset the Oil Service Light in the Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) .. In this tutorial, you will learn how to reset the oil service light in the Toyota 4Runner, a straightforward task to perform only after.. …
How to Change the Engine Oil and Oil Filter on a Toyota 4Runner
How to Change the Engine Oil and Oil Filter on a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) Below are the steps to perform routine maintenance by replacing the engine oil and oil filter on a Toyota 4Runner. First, lift the vehicle and begin …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos