Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Fortuner
    4. : Where is the fuse box located in the Toyota Fortuner?

Toyota Fortuner - Video tutorial

Model: Toyota Fortuner An50, An60 - Years 2005-2015
Part: Fuse box
Operation: Where is the fuse box located in the Toyota Fortuner?

If your Toyota Fortuner is experiencing electrical problems and you want to work on one or more fuses, then all you have to do is carefully read the following mini-guide to discover where the box containing them is located. Before proceeding, we remind you that it is mandatory to completely disconnect the car battery before any intervention on the fuses. Once you have done this, reach the driver's side and locate the plastic panel located below the steering wheel. Remove it with your own hands and immediately behind it, you will finally have access to all the fuses.


Posted on 8 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Fortuner 2005-2015 - Where is the fuse for the Toyota Fortuner's cigarette lighter located? Read Answer
    • Fortuner 2015-2023 - Where are the fuses located in the Toyota Fortuner? Read Answer
    • Fortuner 2015-2023 - Where is the air conditioning fuse located in the Toyota Fortuner? Read Answer
    • Fortuner 2005-2015 - Where is the fuse for the Toyota Fortuner's cigarette lighter located? Read Answer
    • Fortuner 2005-2015 - Where is the cigarette lighter fuse located in the Toyota Fortuner/Hilux? Read Answer
    • Fortuner 2015-2023 - Where is the fuse box located in the Toyota Fortuner? Read Answer
    • Fortuner 2015-2023 - What is the location of the horn relay on the Toyota Fortuner? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos