Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on a Toyota Highlander?

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Replacing the remote battery on a Toyota Highlander, as shown in this tutorial, is a very simple and cost-effective task. You will need a replacement CR2032 battery and a small flathead screwdriver.

First, remove the emergency metal key by pressing the designated side button, then separate the two halves of the remote by prying with the screwdriver in the indicated slot. Once done, extract the internal circuit, remove the old battery, and insert the new one, ensuring the correct orientation.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to replace the battery of the 2020 Toyota Highlander remote control
How to replace the battery of the 2020 Toyota Highlander remote control
Toyota Highlander (2020-2026 / Xu70) We start the replacement of the battery of the 2020 Toyota Highlander remote by removing the top part of the remote itself by pulling upwards using t…
How to Replace the Remote Battery of the Toyota Highlander?
How to Replace the Remote Battery of the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) As shown in this tutorial, replacing the remote battery of the Toyota Highlander is a very simple task. You will need a replacement CR2016 battery an…
Replace the Key Fob Battery of the Toyota Highlander
Replace the Key Fob Battery of the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) Follow these steps to disassemble and replace the battery of the key fob for the Toyota Highlander. First, take your key fob and remove the physical …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos