Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Timing Belt Light on a Toyota HiLux

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

If the timing belt light on your Toyota HiLux (2005-2015) stays on even after you have replaced it, don't worry. Below are all the necessary steps to eliminate it permanently.

First, make sure that the "ODO" display is visible on the instrument panel. Then, turn off the ignition.

Press and hold the button located at the bottom of the speedometer while you turn the ignition back on. As soon as a small number appears on the display, press the same button multiple times until you see the number "10". Finally, press and hold the button again until the reset is complete.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a 2013 Toyota Hi Lux
How to Replace the Timing Belt on a 2013 Toyota Hi Lux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) After driving 37,282 miles, it is time to replace the timing belt on your 2013 Toyota Hi Lux. Today's video will guide you through the steps to repla…
How to Reset the Timing Belt Warning Light on a Toyota Hi Lux
How to Reset the Timing Belt Warning Light on a Toyota Hi Lux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) Today, you will learn how to reset the timing belt warning light on a Toyota Hi Lux vehicle. To perform this simple operation, keep the instrument cl…
How to restore the timing belt warning light on the Toyota Hi-lux MK6
How to restore the timing belt warning light on the Toyota Hi-lux MK6
Toyota HiLux (1997-2005 / N160, N140, N150, N170) In this video, we can see how to reset the timing belt warning light on a sixth generation Toyota Hi-lux after replacing it. To do this operation, a …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos