Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Toyota Venza

Model: Toyota Venza MK  1, Av10 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

Today, you will learn how to remove and replace the front bumper of the Toyota Venza by following the instructions below. First, open the hood of your vehicle and start removing all the plastic clips located at the top of the front bumper; then remove the additional clips located under the bumper and on both sides of the front wheel wells, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed; then install the new one by reversing the procedure!


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper of the Toyota Venza
Removing the Rear Bumper of the Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) Follow these simple steps to remove and replace the rear bumper of the Toyota Venza. First, open the trunk and start unscrewing the mounting screws l…
Replacing the Headlight Bulb on the Toyota Venza
Replacing the Headlight Bulb on the Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) In this video, we will see how to disassemble and replace the headlight bulb on the Toyota Venza by following these simple steps. First, open the hoo…
How to Replace the Headlight Bulb on a Toyota Venza
How to Replace the Headlight Bulb on a Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) To replace the headlight bulb on a Toyota Venza, open the hood to access the components at the back of the corresponding headlight. Disconnect the co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos