Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Venza
    4. : Disassembly of the rear bumper of the Toyota Venza

Toyota Venza - Video tutorial

Model: Toyota Venza MK  1, Av10 - Years 2008-2017
Part: Rear bumper
Operation: Disassembly of the rear bumper of the Toyota Venza

Shortly, we will see the instructions that will allow us to disassemble and replace the rear bumper of the Toyota Venza, following these simple steps. First, we open the rear hatch of the trunk and begin to unscrew the fastening screws found on the top of the front bumper; then we unscrew the additional screws on both sides of the rear wheel arches, as shown in the video. At this point, we remove the screws under the bumper to start releasing it on the sides, until it is completely removed; we apply the reverse process for reassembly!


Posted on 6 March 2024 by ScegliAuto

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos